VENTURA ALLOY AND STEELS PRIVATE LIMITED
2714 Hot Work Tool Steel

2714 Hot Work Tool Steel

Send Inquiry
2714 Hot Work Tool Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Specifications:

Imported
Process:EAF + LF + VD + Forged + Annealed + Oil QT (Quenched & Double Tempered)
HardnessBelow 245HB / 370 – 410 BHN
Diameter Tolerance0/+3 mm max Blocks & 0/+2 mm max Rounds
Grain Size6-8 acc to ASTM E 112-96
Ultra StandardSEP: 1921, III D/d
Non Metallic Inclusion2 max acc to ASTM E 45
Hardness Tolerance2 HRC ( All material hardness in between 370 – 410 BHN)
Chemical CompositionC: 0.50 – 0.60, Mn: 0.65 – 0.95, P/S: 0.030 MAX, Si: 0.10 – 0.40, Cr: 1.0 – 1.20, V: 0.08 – 0.12, Mo: 0.45 – 0.55, Ni: 1.5 – 1.8
Tensile StrengthCorresponding to Hardness 1220 – 1390 N/mm2
Yield StrengthCorresponding to Tensile 1100 N/mm2 Minimum
ElongationA% ->14%
Forging Ratio5 : 1 Approx

Indian
ProcessI/F + Forged + Annealed + OIL QT (Quenched & Double Tempered)
HardnessBelow 245 HB / 370 – 410 BHN
Diameter Tolerance0/+10 mm max )But aim 5 mm)
Grain Size6-8 acc to ASTM E112-96
Ultra StandardSEP: 1921, III D/d
Non Metallic Inclusion2 max acc to ASTM E 45
Hardness Tolerance3 HRC ( All material hardness in between 370 – 410 BHN)
Chemical CompositionC: 0.50 – 0.60, Mn: 0.65 – 0.95, P/S: 0.030 MAX, Si: 0.10 – 0.40, Cr: 1.0 – 1.20, V: 0.08 – 0.12, Mo: 0.45 – 0.55, Ni: 1.5 – 1.8
Tensile StrengthCorresponding to Hardness 1220 – 1390 N/mm2
Yield StrengthCorresponding to Tensile 1100 N/mm2 Minimum
ElongationA% ->14%
Forging Ratio04:01:00