DB6 TOOL STEEL

DB6 TOOL STEEL
DB6 TOOL STEEL
Product Code : DB6 TOOL STEEL
145 - 170 INR
Price And Quantity
Minimum Order Quantity :
200
Unit of Measure :
Kilograms/Kilograms
Price Range :
145 - 170 INR
Product Description

DB6 / AISI L6 / DIN  2714

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4


C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

USA

Europe Germany China Japan India R. of Korea Russia
AISI / SAE En DIN, WNr GB JIS IS KS GOST
A681 L6 55NiCrMoV7 56NiCrMoV7 5CrNiMo SKT4 T55Ni7Cr4Mo5V1 STF4 4ChMNFS
 

Ventura Alloy and Steels Stocks andSupplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is anextreme pass on steel with high treating resistance and greatthrough-solidifying properties. Its nickel substance has it uncommonly effectsafe – a highly recommendable element for vast mallet & press bites thedust alike. This evaluation is generally supplied in toughened condition orextinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel formanufacturing passes on of different kinds, press bites the dust, expulsionkicks the bucket, retainer plates, heavily clad trim bites the dust, hot shearsharpened pieces of steels and instrument holder.

Utilized as standard steel formanufacturing passes on of different kinds, press bites the dust, expulsionkicks the bucket, retainer plates, heavily clad trim bites the dust, hot shearsharpened pieces of steels and instrument holder.

PROCESS ROUTE

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FORROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FORROUNDS/MILLED FOR FLATS

STEEL PROPERTIES

The exceptional Hot Work Pre-solidifiedSteel has great toughness and high wear resistance. DB6 Steel is generallyprovided in hard, quenched, tempered and annealed condition in strengthenedcondition in exceptional cases. Normally it's working hardness is 360-430 BHN.This steel grade is the updated type of DIN 2713 for higher efficiency andperformance.

APPLICATION

Dies for Specially Drop and Close DieForgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, DieHolder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, ShearingBlades, Tools etc.

DB6 / AISI L6 / DIN  2714

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4


C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

USA

Europe Germany China Japan India R. of Korea Russia
AISI / SAE En DIN, WNr GB JIS IS KS GOST
A681 L6 55NiCrMoV7 56NiCrMoV7 5CrNiMo SKT4 T55Ni7Cr4Mo5V1 STF4 4ChMNFS
 

Ventura Alloy and Steels Stocks andSupplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is anextreme pass on steel with high treating resistance and greatthrough-solidifying properties. Its nickel substance has it uncommonly effectsafe – a highly recommendable element for vast mallet & press bites thedust alike. This evaluation is generally supplied in toughened condition orextinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel formanufacturing passes on of different kinds, press bites the dust, expulsionkicks the bucket, retainer plates, heavily clad trim bites the dust, hot shearsharpened pieces of steels and instrument holder.

Utilized as standard steel formanufacturing passes on of different kinds, press bites the dust, expulsionkicks the bucket, retainer plates, heavily clad trim bites the dust, hot shearsharpened pieces of steels and instrument holder.

PROCESS ROUTE

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FORROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FORROUNDS/MILLED FOR FLATS

STEEL PROPERTIES

The exceptional Hot Work Pre-solidifiedSteel has great toughness and high wear resistance. DB6 Steel is generallyprovided in hard, quenched, tempered and annealed condition in strengthenedcondition in exceptional cases. Normally it's working hardness is 360-430 BHN.This steel grade is the updated type of DIN 2713 for higher efficiency andperformance.

APPLICATION

Dies for Specially Drop and Close DieForgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, DieHolder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, ShearingBlades, Tools etc.

Contact Us

Shop No-3, Radha Bldg., KVSC Lane, Mahavir Nagar, Kandivali (W), Mumbai, Maharashtra, 400067, India
Phone :91-22-28651111