- Kilograms/Kilograms
- 200
- Kilograms/Kilograms
- 110.00-
- Other
56NiCrMoV7 Hot Work Tool Steel Chemical Composition - (Typical Analysis in %)
STANDARDS | 55NiCrMoV7 | DB6 | DIN 2714 | AISI L6 | AFNOR 55NCDVV7 | JIS SKT4 |
C | Si | Mn | P | S | Cr | Ni | Mo | V |
0.50-0.60 | 0.10-0.40 | 0.65-0.95 | <0.015 | <0.004 | 1.0-1.20 | 1.50-1.80 | 0.45-0.55 | 0.07-0.12 |
USA | Europe | Germany | China | Japan | India | R. of Korea | Russia |
AISI / SAE | En | DIN, WNr | GB | JIS | IS | KS | GOST |
A681 L6 | 55NiCrMoV7 | 56NiCrMoV7 | 5CrNiMo | SKT4 | T55Ni7Cr4Mo5V1 | STF4 | 4ChMNFS |
Ventura Alloy and Steels Stocks and Supply 56NiCrMoV7 Hot Work Tool Steel in India and abroad. It is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).
Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
PROCESS ROUTE
EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS
STEEL PROPERTIES
The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.
APPLICATION
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.
- Mumbai Navashiva
- 50-100 Per Day
- 2 Week
- Yes
- Contact us for information regarding our sample policy
- All India
Unit No.1201 & 1202, Ghanshyam Enclave P. Co-Op. Soc. Ltd., New Link Rd, Kandivali (W), Mumbai Maharashtra India +918037301435
Phone :+918037301435