Applications: EN 47 Spring Steel, highlight the advantage is good hardenability, another hot working performance, comprehensive mechanical properties, decarburization resistance is also good big cross section of various important spring, such as automobile, locomotive, large plate spring, spring, etc. SUP10 Spring main used for heavy vehicles, tractors, industrial production load, stress and the diameter of the larger plate spring and helical spring. It is also used widely in the motor vehicle industry and many general engineering applications. Suitable for applications that require high tensile strength and toughness. Typical applications include crankshafts, steering knuckles, gears, spindles and pumps.
Forging: Forge at 1050°C. Do not work this steel when it has fallen below 840°C.
Annealing: Heat slowly to 820-840°C, soak well. Cool slowly in the furnace.( Our annealing is done in electric furnace to avoid decarburization. )
Hardening: Pre heat slowly to 650/700°C and thoroughly soak. Continue heating to the final hardening temperature of 830/860°C and allow the component to be heated through. Quench in oil.
Tempering: Temper the EN47 spring steel component immediately after quenching whilst tools are still hand warm. Re-heat to the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in air. For most applications tempering of this grade will be between 400-600°C.
Heat Treatment: Heat treatment temperatures, including rate of heating, cooling and soaking times etc. will vary due to factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and workpiece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of EN47.
Wire Rod Round – As Rolled (If required we can also supply in spheroidized annealed condition.) 8 MM to 32 MM DIA
Flat Bars - As Rolled and Spheroidized Annealed
Sizes Available: 20 x 20 mm, 22 x 22 mm, 25 x 25 mm, 25 x 60 mm, 28 x 28 mm, 28 x 36 mm, 32 x 32 mm, 36 x 36 mm, 36 x 45 mm, 55 x 55 mm, 40 x 40 mm, 45 x 45 mm, 45 x 55 mm
Price Range: Rs.68-90 per Kg
- 1 Ton Per Month
- 1 - 3 Months
- Contact us for information regarding our sample policy
- All India
Unit No.1201 & 1202, Ghanshyam Enclave P. Co-Op. Soc. Ltd., New Link Rd,Kandivali (W), Mumbai Maharashtra India +918037301435